Care

Yes, that is what it was made for. Our pieces are recycled stainless steel with an 18ct recycled gold PVD coating, so they hold their colour through water, sweat, salt and chlorine. You never have to take them off.

It can handle both. Apply them first and your jewellery second, and the shine lasts longest.

Only your rings, for weight training or rough work. Steel is hard, but constant friction against a barbell will dull any finish over time.

PVD is not plating. The gold bonds to the surface at a molecular level, which is why it lasts far longer than standard gold plating. With normal wear you should not see fading.

After the sea or the pool, rinse in fresh water and pat dry with a soft cloth. Salt and chlorine will not harm the piece, but left to dry they build up a dull film that hides the shine.

Now and then, give it a proper clean: warm water, a drop of washing-up liquid and a soft toothbrush around any texture or setting. Rinse and dry fully.

Jewellery dips and silver polish. They are made for silver's tarnish, not for steel. For pieces with stones, also skip ultrasonic cleaners.

Separately. What marks jewellery most is other jewellery. Fasten chains before putting them away so they do not knot.

The stones are hard enough for daily wear; the settings are the delicate part. Clean gently around a stone and skip ultrasonic cleaners. If a stone moves when you nudge it, stop wearing the piece and write to us.

Usually it is a film of salt, chlorine or soap. Give it the proper clean described above. If it still looks dull afterwards, write to us with a photo.

Every piece comes with a 2-year warranty. If something goes wrong, write to us with your order number and a photo and we will repair, replace or refund it.